This slim line UHF antenna is waterproof and easy to install. It is designed for process automation and inventory control. The low VSWR of typically less than 1.3:1 gives this antenna a return loss better than 18dB. The narrow vertical beam width giving it a greater distance potential than competing products.
Also available in a 10 dBi version.
Learn MoreHigh Performance circuit with sensitivity and stability effects
Power: Up to 6W
Connector: 1.3m SMA socket cable
Supports: ISO 15693, NXP EPC, NXP UID, HF EPC
High Performance circuit with environmental protection
Power: Up to 6W
Connector: 1.5m SMA socket cable
Supports: ISO 15693, NXP EPC, NXP UID, HF EPC
Fast anti-collision makes thes gates ideal for conference attendance, access control or process control. Includes infrared motion detection
Power: 12 VDC
Distance: Up to 4' (120cm)
Connector: TCP/IP, RS232 & RS485
Supports: ISO 15693, ISO 18000-3
Ideal for picking up tags in all directions.
Waterproof, easy to install mounting hardware included.
Power: Up to 100W, 12dBi
Distance: Up to 0.43 miles (700m)
Connector: N Female connector
Most read energy goes one direction.
Waterproof, easy to install mounting hardware included.
Power: Up to 100W, 15dBi
Distance: Up to 0.43 miles (700m)
Connector: N Female connector
Ideal for long ranges.
Waterproof, easy to install mounting hardware included.
Power: Up to 100W, 12.5dBi
Distance: Up to 0.43 miles (700m)
Connector: N Female connector
Designed to fit into the back of shelving units to provide real-time inventory.
Power: Up to 100W / 7.5dBi
Connector: SMA Female connector
Narrow triangular beam makes these ideal for pallet identification.
Power: Up to 100W / 15dBi
Connector: N Female connector
Narrow triangular beam makes these ideal for parking lot entrance or production lines.
Power: Up to 100W / 15dBi
Connector: N Female connector
Good for close range identification when the tags orientation is unpredictable.
Power: Up to 100W / 8dBi
Connector: N Female connector
Antenna is placed on the shelf under a protective material to detect real-time location of items.
Power: Up to 50W / 4.5dBi
Distance: Under 12" (30cm)
Connector: MMCX Female connector
Good for longer range identification when the tags orientation is unpredictable.
Power: Up to 100W / 12dBi
Connector: N Female connector
Allows multiple antennas to share one reader input. This significantly improves feasibility and positive RoI for Real-Time Location Tracking RTLS projects.
Learn More