RFID High Pressure Tag
When it comes to material being subjected to pressure all tags are not created equal!
When subject to about 1000 pounds per square inch of pressure most tags will break down and in many cases break into pieces.
Our special High Pressure tags can handle 3000 PSI (210.97 KG/cm) in a 13.56 MHz. frequency.
The 13.56 MHz. 3000 PSI tag line has a variety of sizes from 16 mm through 30 mm and numerous different IC's with different sizes of user memory. In case you need to comply to ISO 14443A or ISO 15693 standards we have IC's that are specific to the standards required.
16 mm 22 mm
These tags can be eched with the tag ID or your logo
IP68 with chemical resistance to HCI 10%, gasoline, oil, bleach, formic accid, caustic soda
Operating temperature range: -25°C ~ +85°C
Storage temperature range: -25°C ~ +120°C
+160°C for 35 hours
+220°C for 30 seconds
If you require a UHF High Pressure tag then the tag you need is right here:
This small tag (19 mm x 23mm x 4 mm including case) is specifically designed to be inserted in metal not attached to metal - this is perfect for Metal mould management, or asset and product identification. With a temperature range of -40°C to 200°C (392°F) this tag is designed for the high temperature environments and comes equipped with Scotch VHB adhesive backing that will withstand over 300°C and very high adhesive qualities when attached to any metals including stainless steels.
For more information on these high pressure tags fill in the form below