RFID Jewellery Tag
Using RFID to protect your valuable mechandise is now even easier using the RFID Jewellery tags from SkyRFID. You can tag your valuables using and one of three different frequencies:
- Low Frequency(LF) 125 kHz,
- High Frequency (HF) 13.56 MHz.
- Ultra High Frequency (UHF) 860~ 960 Mhz.
These RFID Jewellery tags can be either Low Frequency or High Frequency
Read Only or Read Write plus additional memory depending on Frequency and IC
Size - 20 x 30 x 3.5 mm plus 10 cm fine woven string, Color - black
Temperature Range - 10°C ~ + 60°C
Options - custom logo embossed or raised design available
New UHF Gen 2 Single Use Jewellery Tag - The ultimate defense against theft!
New Single Use braided wire jewellery tag with locking silver rings
Long distance and very high speed read rates
Read Distance: Tested by SkyRFID at over 2 meters or 7 feet!
NXP G2XM IC with 512 bits User Memory, 64 bit Unique TID and 96 bit EPC
170 mm x 2 mm braided wire with silver rings for locking on high value items
Can only be removed by cutting wire which destroys read distance
One or both ends can be attached to item depending on read distance required.
UHF Gen 2 Jewellery Tag
UHF Gen 2 with 96 bits EPC or optional 2048 bit memory
Size - 42 X 28 x 1.0 mm plus 50 mm for fastener and fine woven very strong string
While the Low Frequency and High Frequency Jewellery Tags provide excellent control and defense against theft, the new Gen 2 UHF Jewellery Tags can eliminate theft!
Using the SkyRFID Gen 2 Fixed reader and antennas with timed tag reads, when a tag leaves the read zone an alarm will sound and the system will show the location and direction that the tag moved in! No longer can someone take a piece of expensive jewellery and try to hide it on their person or take the tag off and then hide the jewellery.
The new Gen 2 UHF Jewellery Tags are the ultimate in protecting valuables and extremely cost effective! For more information on the new SkyRFID Jewellery Tags or our standard line of Jewellery Tags fill out the form below.